MicronJet 800 Microneedles 0.8 mm | 30 Pieces
  • New
MicronJet 800 Microneedles 0.8 mm | 30 Pieces

MicronJet™ 800 Microneedles 0.8 mm | 30 Pieces

MicronJet™ 800 is a sterile single-use microneedle device for the controlled intradermal administration of suitable liquid substances.

  • 3 hollow silicon micro-pyramids
  • Microneedle length: 0.8 mm
  • Developed for medium- to higher-viscosity formulations
  • Compatible with standard syringes; Luer-Lock or Luer-Slip under 3 ml according to the manufacturer
  • Latex-free and EtO sterilised
  • 30 individually sterile-packed single-use devices
  • CE marked according to the manufacturer
  • For healthcare professionals only. Use exclusively with substances approved for intradermal administration
200401
immediately available
€270.00
incl. tax, plus shipping Shipping excluded | Delivery time 2 - 3 days within Germany* | Abroad may vary

 
Controlled intradermal administration

MicronJet™ 800 Microneedles – 0.8 mm

MicronJet™ 800 is a sterile single-use microneedle device comprising three hollow silicon micro-pyramids. The defined length of 0.8 mm supports controlled delivery of suitable liquid substances into the dermis.

3hollow silicon microneedles
0.8 mmmicro-pyramid length
30individually sterile packed
CECE marked according to the manufacturer

What distinguishes MicronJet™ 800

  • Three patented hollow silicon micro-pyramids
  • Defined microneedle length of 0.8 mm
  • MEMS manufacturing technology for consistent geometry
  • For controlled intradermal administration of liquid substances
  • For standard syringes; compatible with Luer-Lock and Luer-Slip syringes under 3 ml according to the manufacturer
  • Latex-free, non-pyrogenic and EtO sterilised according to the instructions for use
  • Single-use device for healthcare professionals

Which formulations?

The 0.8 mm variant was developed for slightly thicker skin areas and medium- to higher-viscosity formulations. The manufacturer specifies a flow rate comparable to a 27G needle.

Important: MicronJet™ 800 may only be used with substances or medicinal products approved for intradermal administration. Suitability, dose and use are governed by the labelling of the respective preparation and the instructions for use.

From the syringe to the dermis

The device is firmly attached to a compatible standard syringe in the same way as a conventional needle. The blue line serves as an orientation guide during use.

1 · ConnectionAttach to a compatible standard syringe
2 · OrientationThe blue line indicates the required alignment
3 · DeliveryThree hollow channels deliver the liquid intradermally

This is not application training. Read the complete instructions for use before first use and observe any product-specific training requirements.

Technical data

ProductMicronJet™ 800
Configuration3 hollow silicon micro-pyramids
Microneedle length0.8 mm
TechnologyMEMS – Micro-Electro-Mechanical Systems
UseIntradermal administration of suitable liquid substances
Syringe connectionStandard syringe; Luer-Lock or Luer-Slip under 3 ml according to the manufacturer
SterilisationEthylene oxide (EtO)
Material informationLatex-free; non-pyrogenic according to the instructions for use
Packaging30 individually sterile-packed single-use devices
Storage−10 to 30 °C; keep dry and away from sunlight
Country of originIsrael
ConformityCE marked according to the manufacturer

Important information

  • For single use by healthcare professionals only
  • Not intended for aspiration of liquids
  • Do not use on open wounds, cuts, skin abrasions, skin infections or otherwise damaged skin
  • Do not use if the sterile packaging is open or damaged
  • Discard damaged devices and replace with a new device
  • After use, dispose of in a suitable sharps container in accordance with national or institutional requirements
Professional-use product: The labelling, complete instructions for use and approval of the substance used for intradermal administration are authoritative. This product description does not replace training or a medical decision.

Manufacturer:
NanoPass Technologies Ltd.
3 Golda Meir St.
Nes Ziona 7403648
Israel
Phone: +972-8-9462905
Email: [email protected]

Authorised Representative in the European Union:
MedNet EC-REP GmbH
Borkstrasse 10
48163 Muenster
Germany
Phone: +49 251 322660
Fax: +49 251 3226622

Product added to wishlist
Product added to compare.
group_work Cookie consent