JBP Nano Cannula 22G x 50 mm | Blunt Microcannulas + Pre-Puncture Needles | 24 pcs
JBP Nano Cannula 22G x 50 mm are sterile blunt disposable cannulas with an ultra-thin wall design for professional use by qualified personnel. The pack contains 24 blunt microcannulas 22G x 50 mm and 24 matching pre-puncture needles 21G x 25.4 mm.
Contents: 24 sterile blunt disposable cannulas + 24 pre-puncture needles
JBP Nano Cannula · 22G × 50 mm
JBP Nano Cannula 22G × 50 mm – blunt microcannula with Ultra-Thin-Wall construction and puncture needles
The JBP Nano Cannula 22G × 50 mm is a sterile blunt-tip microcannula for professional use. Each box contains 24 microcannulas and 24 matching puncture needles. The wall construction described by JBP as Ultra-Thin Wall leaves more usable internal space than a thicker tube wall of the same outside gauge, although no exact inner dimensions are publicly specified for this model in the available documentation.
- 22G × 50 mm
- blunt tip
- Ultra-Thin Wall
- 24 + 24 pcs.
- CE 0068*
Box contents
24 complete working sets in one box
Blunt microcannula
- Size
- 22G × 50 mm
- Wall type
- Ultra-Thin Wall
- Tip
- blunt, no cutting bevel
- Quantity
- 24
Puncture needle
- Size
- 21G × 25,4 mm
- Preparation of access
- ✓
- Quantity
- 24
Why this configuration
The practical value lies in the combination of 22G, 50 mm and Ultra-Thin Wall
- 22G
Blunt 22G configuration
The microcannula itself is blunt and has no cutting bevel. Access is prepared with the separately supplied puncture needle.
- 50
50 mm shaft length
The 50 mm version provides a longer working length than short microcannulas. The appropriate length depends on the intended professional procedure.
- UTW
Ultra-Thin Wall
The manufacturer term describes a thin tube-wall design. With the same external gauge, this geometrically leaves more cross-section available for the inner lumen.
- 24×
24 matched sets
24 microcannulas and 24 puncture needles are supplied in equal quantities, avoiding the need to source the access needles separately.
Wall construction
What “Ultra-Thin Wall” actually describes
The gauge specifies the external size of the cannula. A thinner tube wall can leave more space for the lumen within the same outer diameter. Geometrically, this can reduce flow resistance compared with a thicker-wall construction of the same external size.
The available documentation for this 22G version does not state a specific wall thickness or exact inner diameter. The diagram therefore illustrates the principle only and does not represent manufacturer dimensions.
Principle diagram
same outer diameter
Technical data
Product data at a glance
| Product | JBP Nano Cannula |
|---|---|
| prpmed.de item no. | 100328 |
| Blunt microcannula | 22G × 50 mm |
| Puncture needle | 21G × 25.4 mm |
| Wall type | Ultra-Thin Wall |
| Tip | blunt, no cutting bevel |
| Box contents | 24 microcannulas + 24 puncture needles |
| Product type | sterile single-use products |
| Sterilisation | EO sterilised according to the available labelling |
| Packaging | individually sterile |
| Use | single use |
| Storage | room temperature, dry and protected from light |
| Origin | Made in Korea |
| CE marking | CE 0068 according to the available labelling |
In the workflow
The two components have different roles
Check
Inspect the sterile barrier, expiry date and integrity of both components before use.
Prepare access
According to the product labelling, the sharp 21G × 25.4 mm puncture needle is supplied as an accessory for preparing access.
Use the microcannula
The blunt 22G × 50 mm cannula is then used according to the intended professional procedure and manufacturer information.
Dispose
Both components are single-use products and must be disposed of after use according to local requirements for sharps.
Safety and use
For qualified professionals
- Use only if the individual sterile packaging is undamaged
- Check the expiry date before use
- Verify compatibility between the cannula hub and syringe used
- Do not reuse or resterilise
- Do not use damaged or bent units
- Store dry and protected from direct sunlight
- Follow the current instructions for use and product labelling
- Dispose of in a suitable puncture-resistant sharps container
Regulatory information
3, 4 Floor, Standard Factory 2-dong
15, Jayumyeok2-gil
Gunsan-si, Jeollabuk-do
Korea
C/ Horacio Lengo Nº 18
29006 Málaga
Spain
EO
Single use
Made in Korea
Frequently asked questions
Quick answers
How many cannulas are in one box?
What does Ultra-Thin Wall mean?
Why is a 21G puncture needle included?
Is the JBP Nano Cannula sterile?
Can the cannula be reused?
Who is the product intended for?
Manufacturer:
Feel Tech Co., Ltd.
3, 4 Floor, Standard Factory 2-dong
15, Jayumyeok2-gil
Gunsan-si, Jeollabuk-do
Korea
EU Representative:
CMC Medical Devices & Drug S.L.
C/Horacio Lengo N 18
CP 29006 Málaga
Spain