SERVOspin Evolve benchtop centrifuge – 6×15 ml angle rotor – for PRP preparation
SERVOspin Evolve benchtop centrifuge – 6×15 ml angle rotor – for PRP preparation
SERVOspin Evolve benchtop centrifuge
SERVOspin Evolve benchtop centrifuge – 6×15 ml angle rotor – for PRP preparation
SERVOspin Evolve benchtop centrifuge – 6×15 ml angle rotor – for PRP preparation
SERVOspin Evolve benchtop centrifuge

SERVOspin Evolve benchtop centrifuge – 6×15 ml angle rotor

  • Quiet benchtop centrifuge with 54° angle rotor, 6×15 ml
  • Speed: 300–5000 rpm; max. RCF: up to 2,600 g
  • Digital time/speed preselection, RCF display
  • Brushless motor, imbalance control
  • Electronic lid lock
  • Scope of delivery: Rotor & adapter set
  • Compliance: CE-marked IVD according to manufacturer's specifications
  • Warranty: 24 months
  • Note: For professional users only
100416
immediately available
€831.81
incl. tax, plus shipping Shipping excluded | Delivery time 2 - 3 days within Germany* | Abroad may vary

 
Compact low-speed centrifuge

SERVOspin Evolve – controlled centrifugation in a compact format

The SERVOspin Evolve is designed for smaller sample series in medical practices and laboratories. Its 54° fixed-angle rotor holds six tubes up to 15 ml; speed and run time can be set digitally and saved in two programs.

  • 300–5,000 rpm and a maximum of 2,600 × g
  • RCF display, two program memories and continuous operation
  • Brushless motor, imbalance control and electronic lid lock

Key parameters at a glance

The operating range covers typical low-speed applications. The required settings always depend on the tube system used and its instructions for use.

300–5,000rpm, adjustable in increments of 10
2,600 × gmaximum relative centrifugal acceleration
30 s–99 minplus continuous operation
2 programsfor recurring settings

For traceable workflows

Speed, RCF and time must be considered together. The SERVOspin Evolve supports the controlled implementation of specified centrifugation parameters but does not replace the protocol supplied by the tube manufacturer.

Check the tube specifications

Use the RCF, run time, fill volume and permitted rotor type stated in the instructions for use.

Set speed and time

Enter the values digitally and save frequently used settings to a program key.

Check the RCF value

The display can be switched between speed and the calculated RCF value.

Important: The same rpm does not automatically produce the same RCF with different rotor radii. The RCF/RPM calculator assists with the mathematical conversion; it does not provide a centrifuge setting protocol.

Designed for day-to-day practice and laboratory use

Compact footprint

At 30 × 24 × 18 cm, the unit requires little bench space and weighs 5.2 kg.

Quiet operation

According to the manufacturer, the brushless, vibration-damped motor reaches approximately 56 dB at full load.

Integrated safety functions

Imbalance control, internal diagnostics and electronically monitored lid locking support safe operation.

Supplied ready for setup

The 54° fixed-angle rotor and adapter set are included.

Position within PRP workflows

The SERVOspin Evolve can be used as a technical aid when centrifuging compatible PRP tubes. The tube, rotor, fill volume, RCF and run time must be coordinated in accordance with the applicable instructions for use.

The centrifuge itself has no therapeutic intended purpose and makes no statement regarding the clinical efficacy of a processed product.

  • Six rotor positions for smaller sample series
  • RCF display for technical monitoring
  • Storable settings for recurring workflows
  • For use by qualified professional personnel only

Technical data

Device categoryLow-speed benchtop centrifuge
Rotor54° fixed-angle rotor
Capacity6 × 15 ml
Speed300–5,000 rpm, 10 rpm increments
Maximum RCF2,600 × g
Timer30 seconds to 99 minutes or continuous operation
Program memory2 freely assignable programs
MotorBrushless and vibration-damped
Operating noiseApprox. 56 dB at full load
Safety functionsLid lock, imbalance control, internal diagnostics and emergency opening in the event of a power failure
Dimensions30 × 24 × 18 cm (L × W × H)
Weight5.2 kg
Power supply100–240 V, 50/60 Hz
Power consumption70 W
WEEE registration numberDE74434443
Warranty24 months

Scope of delivery

  • SERVOspin Evolve benchtop centrifuge
  • 54° fixed-angle rotor for 6 × 15 ml
  • Adapter set
  • Operating documents

Instructions for users

  • For professional users only
  • Read the operating instructions before commissioning
  • Always load tubes symmetrically and with equal weight
  • Check the rotor and rotor chamber regularly for residue or damage

Frequently asked questions

The answers refer to the technical properties of the unit. The manufacturer's documentation and the specifications of the tube system used remain decisive.

How many tubes can be centrifuged at the same time?

The fixed-angle rotor has six positions for tubes up to 15 ml. Smaller tubes can be used with suitable adapters.

Can frequently used settings be saved?

Yes. Two freely assignable program keys are available for recurring combinations of speed and run time.

Can the RCF value be shown directly?

Yes. A key combination switches the display between speed and the calculated RCF value. Direct RCF programming is not stated in the available manufacturer information.

Is the SERVOspin Evolve specifically intended for PRP?

The SERVOspin Evolve is a low-speed benchtop centrifuge for sample centrifugation. It can be integrated into PRP workflows using suitable tubes and the corresponding parameters, but it has no therapeutic intended purpose of its own.

Is this a Class IIa medical device?

No. According to the manufacturer, the SERVOspin Evolve is a Class A in vitro diagnostic medical device under the IVDR. This classification must be distinguished from MDR Class IIa.

How loud is the centrifuge?

The manufacturer specifies an operating noise level of approximately 56 dB at full load.

Select PRP tubesTube systems and technical product data Open the RCF/RPM calculatorConvert RCF and speed using the rotor radius Knowledge & ToolsCalculators, databases and technical principles

Note: Use only in accordance with the operating instructions, intended purpose and specifications of the tubes employed. Subject to technical changes and errors.

GPSR – General Product Safety Regulation (EU) 2023/988

Responsible economic operator according to GPSR (distributor)

servoprax GmbH

Am Marienbusch 9, 46485 Wesel, Germany

Tel. +49 281 95283-0 · Fax +49 281 56071 · [email protected]

Customers who bought this product also bought:

KAMI Scalp Care Serum 10×10 ml KAMI Scalp Care Serum 10×10 ml 2
immediately available
ANTI AGING

KAMI Scalp Care Serum 10×10 ml

UTSUKUSY
201022
€59.90
€599.00 per Liter
• Professional cosmetic care solution for the scalp• Provides moisture and supports a balanced-looking scalp environment• With regular external use, hair may appear better cared for and visually fuller• Leaves the scalp feeling comfortably conditioned• For external use only – not for injection
Syringe holder - stainless steel/brushed Syringe holder - stainless steel/brushed 2
immediately available
Essentials

Premium stainless steel syringe holder – The elegant organizer for your practice

100315
€30.00
Quality Made in Germany: The precise workmanship and glass bead blasted finish ensure an elegant, satin-matte appearance. The non-porous, refined stainless steel surface can be cleaned without leaving any residue, is resistant to disinfectants, and is autoclavable. Suitable for various syringe types. The robust construction is designed for...
Blue 40 cm tourniquet with one-hand operation Blue 40 cm tourniquet with one-hand operation 2
immediately available
Tourniquets

Blue 40 cm tourniquet with one-hand operation

Mediware
100201
€2.99
Tourniquet with approx. 40 cm length One-hand operation for easy application and release Quick-release tensioner for fast pressure adjustment Colour: Blue Reusable after suitable low-temperature ozone disinfection Medical device for professional use
Red Tourniquet 40 cm with One-Hand Operation Red Tourniquet 40 cm with One-Hand Operation 2
immediately available
Tourniquets

Vein Tourniquet 40 cm – One-handed operation, quick-release buckle in red

Mediware
100119
€2.99
Tourniquet with approx. 40 cm length One-hand operation for easy application and release Quick-release fastener for fast pressure adjustment Colour: Red Reusable after suitable low-temperature ozone disinfection Medical device for professional use
Stainless steel tube holder / test tube rack Stainless steel tube holder / test tube rack 2
immediately available
Essentials

Premium Stainless Steel Test Tube Rack (Matte) – 10 Slots – Made in Germany | Lab...

100314
€31.00
Solid stainless-steel tube rack (10 slots) Surface finish: Glass bead–blasted (matte, low-glare) Hygiene: Fully autoclavable Quality: Made in Germany Sample organisation: Suitable for common tubes used during PRP preparation or blood collection For lab and practice: Compatible with standard laboratory tubes and blood collection tubes up to...
Vacutainer Butterfly - 21G green without holder - PU 50 pieces Vacutainer Butterfly - 21G green without holder - PU 50 pieces 2
immediately available
Injection

Vacutainer Butterfly - 21G green without holder - PU 50 pieces

BD - Becton Dickinson GmbH
100217
€33.00
BD Vacutainer® Safety-Lok™ Blood Collection Set without Holder — for safe and precise blood collection as well as short-term IV administration (up to 2 hours). Maximum precision:With a size of 21G x 3/4" x 7" (0.8 x 19 mm x 178 mm), the set ensures a smooth, precise puncture. Safe and well-thought-out:The integrated Safety-Lok™ system ensures reliable...
Vi PRP-PRO | Buy PRP Tubes - Safe & Efficient Vi PRP-PRO | Buy PRP Tubes - Safe & Efficient 2
immediately available
PRP

PRP tubes | Vi PRP-PRO | with Anticoagulant PU 10 pieces

PRPMED Professional Cosmetic Treatments
100101
€131.00
The VI PRP-PRO glass tube offers a modern solution for producing platelet-rich plasma (PRP) and ensures additional stability and reliability in treatments with a wall thickness of 2.4 mm. Developed with innovative technology and EC-certified (0425-MED-004180-00), it guarantees the highest level of safety and efficiency. Key Features: Certified...
Product added to wishlist
Product added to compare.
group_work Cookie consent