You want to make plasma gel? What equipment do you need to do this?

Equipment for plasmagel production

First - What is plasma gel?

Plasma gel an ideal filler in aesthetics!

The procedure of PRP therapy is no longer a surprise to anyone in this world. Plasma gel is an offshoot of this procedure that aims to restore the lost volume in the face and body through its own substance.

Made from plasma enriched with platelets, by heating it in a special PRP thermostat. The growth factors contained in such a gel further contribute to rejuvenation and improvement of skin quality.

Since the material is made entirely from the patient's own blood plasma, without any foreign additives, it is absolutely safe, well "rooted", does not cause allergic reactions, can be safely used in patients at high risk of complications.

Plasma gel, unlike hyaluronic acid, does not attract water, does not aggravate swelling and does not weigh down the tissues, which is especially important for people with "heavy" faces.

Plasma gel combines well with other injectable and hardware cosmetic procedures. It can even be combined with some of them on the same day.

Plasma gel in orthopaedics

The procedure of PRP therapy is no longer a surprise to anyone in this world. Plasma gel is an offshoot of this procedure that aims to restore the lost volume in the face and body through its own substance.

Made from plasma enriched with platelets, by heating it in a special PRP thermostat. The growth factors contained in such a gel further contribute to rejuvenation and improvement of skin quality.

Since the material is made entirely from the patient's own blood plasma, without any foreign additives, it is absolutely safe, well "rooted", does not cause allergic reactions, can be safely used in patients at high risk of complications.

Plasma gel, unlike hyaluronic acid, does not attract water, does not aggravate swelling and does not weigh down the tissues, which is especially important for people with "heavy" faces.

Plasma gel combines well with other injectable and hardware cosmetic procedures. Some of them can even be combined on the same day.

Plasma gel brings pathology into focus and has a systemic healing effect that has a positive impact on all surrounding tissues: Blood vessels, nerves, muscle fibres, cartilage and bone tissue, ligaments and tendons.

Unlike blockade, where receptors are simply blocked and the pain syndrome is deactivated for a short time, Plasmogel literally revives, rejuvenates damaged tissue and eliminates the actual cause of pain. The lost tissue is gradually replenished and the damaged organ copes better with its function: blood circulation is improved, muscle tone, innervation are normalised, defects in the cartilage layer are eliminated, smoothness of movements returns. Therefore, the plasmogel injection has a stable long-term effect.  

What equipment and materials are necessary for the preparation of the biogenic filler - PLASMOGEL?

If you already use PRP/ PRF techniques, you already have a centrifuge and special PRP tubes. You probably also have injection needles, cannulas, syringes with Luer lock and catheters for blood collection. 

You will also need all these materials for the PLASMA-GEL technique. 

Thermostat to heat the plasma

The procedure takes no more than an hour. Most of the time is spent preparing the gel itself. First, blood is drawn from a vein into special PRP tubes.

These blood tubes are then placed in a centrifuge to produce platelet-enriched plasma.

The finished plasma is then collected in special heat-resistant syringes and placed in a thermostat.

IMPORTANT: The heating temperature range should be between +40 and +90 degrees Celsius so that you can obtain gels with different densities. 

Pay attention to the depth and diameter of the cuvettes - the syringe (2 - 3 ml) must be completely and tightly immersed in the heating unit - this ensures uniform heating of the entire plasma.

The plasma passes through two stages in the thermostat: Heating and cooling, which turns it into a filler ready for spraying - an opaque, milky-beige gel. 

Plasma gel device - Thermostat APAG
immediately available
€988.00
High quality plasma gel device / PRP-Thermostat with preset programs. No China goods! Produced in Italy!   APAG is the latest dermal filler ideal for true natural augmentation and meets all requirements for modern injections. The only filler that is 100% endogenous and therefore well tolerated by the body. The blood is closely monitored by the body system...

Combifix® Adapter Luer-Lock / female-female

The adapter is necessary to hermetically connect two syringes with a Luerlock in order to homogenise the resulting gel. 

Combi stopper

The stopper is placed on the syringe instead of the needle before the syringe is inserted into the thermostat (to prevent the plasma from leaking into the heating unit). 

Tegler Combi-Stopper... Tegler Combi-Stopper... 2
immediately available
Valves, connectors, closures

Tegler Combi-Stopper Closing Cones

100350
€3.95
The combination stopper is placed on the syringe instead of the needle. You need this, for example, before the syringe is inserted into the thermostat (to prevent the plasma from leaking into the heating unit). 

PRP tubes

Only use high quality PRP tubes - otherwise the plasma you receive is not 100% safe for the patient. Strict requirements are placed on such PRP tubes - both in terms of material and packaging as well as sterility and apirogenicity.  

Density Platelet Gel PRP-Tubes Density Platelet Gel PRP-Tubes 2
  • -€90.84
immediately available
€99.16 €190.00
Density Platelet Gel | PRP Tubes PU 10 pcs. Pack of 10, individually wrapped PRP Tubes with separating gel and Anticoagulant: Red with citrate and separating gel for approx. 3-4 ml for convenient and fast plasma production.  Centrifuge tubes are made of high quality borosilicate glass.  Anticoagulant (citrate) and separation gel are already included....

Other consumable material

- Vacutainer Butterfly with or without holder, for blood collection, size - 21g

- 2/3 ml syringe - with Luer-Lok system (mandatory!)

- Cannulas, diameter 22 / 25 g 

Centrifuge for plasma gel

 

IMPORTANT:

Laboratory centrifuges must NOT be used for the production of PRP. Certification as a class 2a medical device must be available!

Centrifuge Medifuge Centrifuge Medifuge 2
immediately available
Home

Centrifuge Medifuge

100333
€2,621.01
High quality Medifuge CGF centrifuge - specially designed for Platelet Rich Plasma (PRP) production with PRP tubes - fractional centrifugation with preset 6-part program. For efficient platelet/growth factor yield.      *Information on the calculation of the delivery date

Related topics

Product added to wishlist
Product added to compare.